Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$0.10
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
$0.94
- Replacement cable anchor bolt for brakes - Includes nut and washer
$1.00
- 8x1mm Allen head
$1.25
Hose fittings for Hayes hydraulic disc brakes
$1.50
- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.50
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.99 - $3.00
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
$2.00
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$2.25
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
$2.25
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
$2.50
- Aluminum straddle cable carrier for cantilever brake
$2.50
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$2.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$2.50
This kit contains the hardware required to support a leather gasket in all SILCA floor pumps. Reusing the original nut can lead to later loosening of the assembly as the nylon insert will take a set over time. A new bolt kit guarantees years and years of trouble free service. Kit includes 5 parts: - Locking Nut, lower washer, and back nut are universal to all PISTA and SUPERPISTA Pumps - 28mm diameter or pumps prior to 2008 will use the thicker 24.6mm back washer - 30mm diameter or pumps after 2008 will use thinner 28mm back washer
$2.50
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.50
• Replacement nut for recessed caliper brakes
$2.95
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
$3.00
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
$3.00
- With plastic washers - Shell: 8mm Allen head axle bolt
$3.15 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$3.25
M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline
$3.50
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$3.50
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
$3.50
- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10
$3.95
Jagwire file boxes pack a lot of cables into a small space for easy access. - Pre-stretched - Single-ended cables feature a weld-cut for ease of installation - SRAM/Shimano mountain compatible cable end - Slick cable is die-extruded for smooth operation - Stainless steel option resists corrosion - Cable Head: Shimano/SRAM Mountain - Defined Color: Silver - Diameter: 1.5mm - Double Ended: No - Length: 1700mm - Quantity Included: 100 - Width: 1.5mm
$3.95
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
$3.99
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$3.99
- Sunlite Cottered Pins
$3.99
- Large Flange-Fits Splined MX Cranks - Sold in pairs
$4.25
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$4.95
- Chrome allen seat binder bolt
$4.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle. - Includes barrel adjuster
$4.99
- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system
$4.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$4.99 - $6.95
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.99
- Cartridge Bearing - 1-3/8-inch Outer Diameter
$4.99
- Steel cable noodle with alloy end caps - Includes plastic liner
$4.99
For proper assembly. - Fits any Trek frame with open groove guide design - For specific compatibility concerns, please contact our Customer Service team
$4.99
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$5.50
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$5.50
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
$5.95
- Grade 10 chromium steel balls
$5.95
- Sold in pairs - Allen wrench included
$5.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black
$5.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
$5.99 - $11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$5.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
$5.99 - $18.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$6.49
Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.1mm
$6.50 - $14.99
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
$6.95
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
Page 1 of 8 Next page